|
All of the following components are included in the Lightweight kit:
Aluminium Unit Construction Body/Chasis Kit
A combination of pre-folded and pre-punched aluminium panels together with 50mm box sections some are precisely punched at the ends to accept the wishbones. The assembly of the body/chassis unit is mainly riveted and bolted and intended to be straightforward with no special engineering skills required, there is no welding to do and the majority of the holes are pre-punched. The unit construction body/chassis unit will consist of:
- Two main side panels/floor
- Two tunnel/diff mounting panels
- Rear panel
- Rear shroud
- Scuttle
- Two dashboard options
- Firewall panels
- Tunnel top
- Tunnel bottom
- Two engine bay panels
- Engine mounting panels
- Engine bay diagonal panels
- Cockpit cross member
- Fillet panels
- Set of diff fillet panels
- Seat back panel
- Set of angle joining panels
- Four front cross members
- Four rear cross members
- Headlight mounting panels
- Spare wheel hoop
- Steering rack panel
- Front panel
- Front underside panel
- Body chassis jig board
Wishbone Pack (Fully Independant)
- Four welded front wishbones
- Four welded rear wishbones
- 16 inner tubes
- 40 top hat Nylaspa bushes
- Screw in top ball joints and lock nuts (2)
- Pre-cut lower front wishbone plates (2)
- Lower front bolt on ball joints (2)
- Six plate set of rear hub carriers (drum brakes)
- Four long rear inner tubes
- Six threaded spindles
- Four spindle tubes
- Set of nyloc lock nuts
- Set of shock absorber brackets
Suspension & Steering
Set of four Zeemeride adjustable seat coil over dampers.
Steering rack and brackets.
Light Set
- Two chrome headlamp cases
- Two sealed beam units
- Two rear lamps
- Two motorcycle style front flasher lamps
- Two side repeaters
- One fog lamp
- One number plate lamp
GRP (Glass Reinforced Plastic)
Set in either Red, Green OR Blue
- Nose cone
- Two rear arches
- Two front cycle wings
Miscellaneous
- Pair of universal engine mountings
- Louvred aluminium bonnet
- Exhaust silencer
- Set of pendulum pedals
- Flyscreen and flyscreen base
- Maxcool radiator
- Electric fan
- Wing bracket material
- Four traditional bonnet catches
- Rear wing piping
- Shroud piping
- Pair of rear wing panels
- Back braced roll over bar
- Pair of stainless steel stone guards
- Assortment of bends to fabricate exhaust pipe
- Stainless steel exhaust cover
- Seat harness reinforcement members
- Black interior deluxe covering
- Black stiff back floor carpet
- 600 piece fastener pack
- Nose cone badge
- Extensive video or DVD instruction
|
